Use file > print in the menu bar to print this page.

A.92.1
This artefact belongs to : © North Vancouver Museum and Archives
Springboard
1925, 20th century
14 x 5 x 122 cm
Gift of W. J. Baker
A.92.1
This artefact belongs to : © North Vancouver Museum and Archives

Keys to History:

West Coast loggers adapted tools and invented new techniques to fell the area's giant trees. Springboards were an innovation that allowed loggers to more easily fell trees with a flared base, such as firs. Notches were cut into the tree above the base; the logger then wedged in the springboard, on which he stood to chop and saw the tree down. The springboards had a steel tip with a lip that was bolted to the end of the board. The steel provided a good grip on the tree, while the board itself had a level, springy surface from which to work. Loggers made only one clear concession to safety in the slippery wetness of the rainforest: hobnailed boots to prevent slipping off their springboards. Hardhats and steel-toed boots did not exist at the time. Today you can still find huge stumps with springboard notches in North Vancouver.

What:

This springboard was used on the north shore. Note its chewed-up surface, caused by the logger's hobnailed boots.

Where:

Springboards such as this were likely made locally, since they were tools specific to the region. Any local blacksmith could have made the wrought-iron hooks.

When:

This springboard is from the early part of the 20th century; they were still in use until at least the 1930s, when chainsaws started to appear.

Who:

Loggers, who usually worked in pairs, included logging-camp staff as well as independent hand-loggers who supplied the region's several mills.

© Musée McCord Museum